FCG SPECIAL OPS
facebooktwitterlinkedingoogleplusblog

EQUIPMENT FOR SALE

 

Mitsubishi ST40CNC Shaper 6-Axis (May 2011)

New price $502,000 Forest City Gear price $238,000

INSTALLED: 03/2011
9641-1 FANUC 30i
4111-1 WORK LIGHT
9600-1 RS232C INTERFACE
4121-1 MACHINE STATUS LIGHT
0711-1 POWER TRANSFORMER
1211-1 CHIP CONVEYOR
9461-1 CIRCUIT BREAKER WITH GROUND CONTROL FAULT CIRCUIT INTERRUPTER
9451-1 LIGHT IN THE CONTROL BOX
9471-1 TWO HAND OPERATIONS
7601-2 CUTTER SET-UP DEVICE
7211-2 CUTTER ADAPTER POWER CLAMP
2111-1A HYDRAULIC PART CLAMPING DEVICE
1000-1 HYDRAULIC AND LUBE OIL CHILLER
9481-1 SPINDLE LOAD INDICATOR (SHOWN ON CRT SCREEN)
7510-1 CUTTER ADAPTOR (STD SIZE)
USA-1 EXPORT SPEC
9032-1A CUTTER SPINDLE FOR QUICK RETURN
1801-1A40 AUTOMATIC OPEN/CLOSE OPERATORS DOOR
4512-1 HIGH COLUMN 200MM
6211-B SWING AWAY (MANUALLY) TYPE HYD. AUTO SUPPORT CENTER
2000-1 STROKING SPEED 50-800 SPM
2000-2 CUTTER MIN DIA CHANGE FROM 10MM TO 1MM
2000-3 ROTARY FEED MINIMUM VALUE CHANGE
2000-4 MAX SEGMENT CUTTING ANGLE CHANGE FROM 360 TO 390 DEGREES

MACHINE SOLD AS IS, WHERE IS, WITH NO IMPLIED WARRANTY BY FOREST CITY GEAR OR MITSIBISHI. YOU WILL BE REQUIRED TO PAY BEFORE MACHINE IS RELEASED, AND YOU WILL BE RESPONSIBLE FOR REMOVING FROM OUR FLOOR WE RECOMMEND TRANSPORT BY AIR RIDE TRUCK.


 

Bourn & Koch 400H Series II

New price $563,980 Forest City Gear price $439,000

Serial #400H548139-6408-6-11 August 31, 2011 Hobber with 1800 mm length with Fanuc 31i CNC Control; Direct Drive; 24" bed extension; hob arbor clamping; foot valve; leveling wedges; magnetic chip conveyor; additional work light; remote pendant control; 1/2", 3/4" and 1 & 1/4" hob arbors; adapter for shank type hobs; Skiiving program; spacers and hydraulic nut

Customer responsible for rigger and freight we recommend air ride truck to prevent transit damage; FOB Roscoe, Il. No implied warranty or servicing by FCG; 10% NON-REFUNDABLE DOWNPAYMENT TO HOLD and full payment required before release

 

Bourn & Koch MS450-125 Shaper

Replacement cost at least $750,000 Please note with sale of this machine we will have to transfer some jobs which can only be done on this very special shaper, for instance high crowns and long shafts which fit down inside table Forest City Gear would provide assistance with these jobs. Forest City Gear price $589,000, delivery to be negotiated.

Serial #MS 45 50167 10620/1 March 2008 updated computer and screen 2013; Mist collector; Jorgenson Mag-Drag chip conveyor; remote handheld station; quick change cutter mechanism; 1-1/4" bore cutter adapter also accepting .700 taper shank cutters, 1-3/4" disc bore adapter accepting 1.062" taper shank cutters; CNC controlled electronic guide for helicals; machine mounted near net tooth sensor; Hydraulically operated retractable tail stock on guide rails accepting Barber Colman style lever operated center for fine delicate work; CNC Linear control of backoff in lieu of mechanical cam for radial crowning and taper cutting; 100 mm sub-base to increase main column height and tailstock; 1 quick change cutter adapter, HSK to 1.250" and same for 1.750"; CNC programing modified to eliminate cycle start time delay; auto door open end of cycle; foot pedal for cutter release; 11.5" Z travel and stroke length 6.1"; chiller for hydraulics and spindle; 10 cycles in one program with up to 6 cuts

 

Marposs Single Flank inspection machine with computer and software for shafts and gears

Replacement cost estimated $125,000 Forest City Gear price $9,500

Marposs Single Flank inspection machine with computer and software for shafts and gears

Customer responsible for rigger and freight we recommend air ride truck to prevent transit damage; FOB Roscoe, Il. No implied warranty or servicing by FCG; 10% NON-REFUNDABLE DOWNPAYMENT TO HOLD and full payment required before release

 

Koepfer 160B-005 (1998)

Forest City Gear price $248,000

Extended bed hobbing machine; will take shafts to 24" length; with taper correction 4050; (HSL) auto loading hydraulic base (5010); deburring head (5020); steady rest head (5030); chip conveyor (6010); drip container (6020); in line filter (6040), electrostatic mist precipitation collector (6050); 6070, 6072, 6074; skiving system (7010); two tone paint; enlarged combo loading (8045); enlarged belt (8065); hob arbor assembly (9000); quick hob arbor (1040); collects dumping (2010); automatic machining (3070); free programming (4020); software package (4030); program for workpieces with 2 gears with two different hobs; single index milling or hobbing (4040); hob arbors inch 1/2, 3/4 , 11/4 metric 10 mm, 13 mm, 16 mm, & 22 mm and adapter for 5/8" shank hobs plus machine capable of jump cycling splines or gears end to end up to 24 inches. Estimated replacement price $750,000.

Customer responsible for rigger and freight we recommend air ride truck to prevent transit damage; FOB Roscoe, Il. No implied warranty or servicing by FCG; 10% NON-REFUNDABLE DOWNPAYMENT TO HOLD and full payment required before release

 

Pfauter PE 125 H (1995)

Approximate new price $500,000 Forest City Gear price $198,000

CNC horizontal gear hobbing machine with 800 mm travel for spline length; high helix capability to 65 degrees plus; tailstock adapter 50 mm bore & adapter plate; hollow draw tube with 42 mm bore for use with 5c collets; 16c collect adapter & draw tube; 16 mm SK 40 hob arbor assembly with hydraulic nut; 22 mm SK 40 hob arbor length hydraulic nut & spacers; 1/2", 3/4", 11/4" hob arbor; skiving capabilities; deburring disc and steady rest includes training; no warranty; customer responsible to remove from FCG; hob head rebuilt 2009.

Customer responsible for rigger and freight we recommend air ride truck to prevent transit damage; FOB Roscoe, Il. No implied warranty or servicing by FCG; 10% NON-REFUNDABLE DOWNPAYMENT TO HOLD and full payment required before release

 

Drake GS: TE-LM CNC Thread Grinder (2006)

Forest City Gear price $287,000

With smart form; smart spindle; fire suppression system; mist collector; PCMCiA card storage; CUD diamond dressing roll; replacement cost estimated $375,000 & FCG price.

Customer responsible for rigger and freight we recommend air ride truck to prevent transit damage; FOB Roscoe, Il. No implied warranty or servicing by FCG; 10% NON-REFUNDABLE DOWNPAYMENT TO HOLD and full payment required before release

 

Takisawa TT200

Forest City Gear price $169,000

Twin spindle lathe with pallet loader


Customer responsible for rigger and freight we recommend air ride truck to prevent transit damage; FOB Roscoe, Il. No implied warranty or servicing by FCG; 10% NON-REFUNDABLE DOWNPAYMENT TO HOLD and full payment required before release